Removable 5.25-inch Media Devices

A variety of SCSI 5.25-inch removable media devices (i.e., tape backup, etc.) can be installed in the four half-height media bays (Figure 4-38). The media devices should be installed in the first available media bay from the top (slot 1). Contact your sales representative or dealer for a list of approved devices.

Slot 3

Slot 2

Slot 1

Figure 4-38. Removable Media Devices

IMPORTANT:

!With the standard configuration, the optional SCSI add-in card and SCSI cable are required.

!The server can include a maximum of two half-height devices and one full-height device.

!Set the SCSI termination of the 5.25-inch device to be installed to OFF and the SCSI ID to a value which is not duplicated or corrupted with that of any other device. Refer to the documentation coming with each of the devices for how to set the values.

!For half-height device, first install a device in slot 1. Then install another device in slot 2.

For full-height device, install the device to the slots 2 and 3.

!This system can include a maximum of two optional file devices.

4-38 Disassembly and Reassembly

Page 104
Image 104
NEC 120Lg manual Removable 5.25-inch Media Devices, Removable Media Devices