3.When the following message is displayed, select Other, then press Enter. “Setup could not determine the type of computer you have, or you have chosen to manually specify the computer type.
Select the computer type from the following list or select “Other” if you have the device support disk provided by the computer manufacturer.”
4.Insert the “Windows 2000
5.When the following message is displayed, press S.
“Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter”. Currently, Setup will load support for the following mass storage devices.
6.When the following message is displayed, select Other then press Enter.
Select the SCSI Adapter your want from the following list, or select "Other" if you have a device support disk provided by an adapter manufacturer
7.Insert the "Windows 2000
8.Select the RAID disk array controller installed in your server from the list of mass storage devices.
9.Follow the messages on the screen to continue to install.
Note: Please consult the Microsoft Windows 2000
Installation Guide for more extensive installation procedures.
For LAN adapter driver installation, see Installing LAN
Adapter Drivers later in this chapter.
10.After installing Windows 2000, logon to the system using the administrator account or other account, which is a member of the Administrator’s group.
11.Insert the EXPRESSBUILDER CD into the system CDROM drive. The “Master Control” menu displays. Select Setup and then select Update NEC 5800 System from the displayed menu items.
Note: If you change the configuration of the system (by adding or removing hardware or operating system software components), or repair the system, you must run the Windows 2000 Update Module again.
