5.Select the “Link Configuration” tab and set the “Auto Negotiation” value to DISABLE. Also set the “Forced Speed and Duplex” value according to the value specified for your HUB.

Note: When selecting the "1000/Full" setting, set “Auto Negotiation” to ENABLE and select only the "1000/Full" setting at the “Negotiable Speeds and Duplexes” item. Also, add/delete any other protocols and services, as necessary.

Driver Installation for the ATI RAGE XL Display Adapter

To take full advantage of the on-board ATI RAGE XL display adapter, perform the following driver installation procedure:

1.Power on, start Windows 2000, and log on.

2.Insert the EXPRESSBUILDER CD into the system CDROM drive. The “Start” Menu displays. Cancel out of the Start menu and run:

D:\WINNT\Video\W2k\Setup.exe

(where D: is the drive letter for your CDROM drive.)

3.Follow the screen prompts.

4.When the message "Digital signature not found" displays, select YES to continue the installation.

5.At the conclusion of the ATI Rage XL installation, reboot the system.

B-8 Installing and Configuring Windows 2000

Page 178
Image 178
NEC 120Lg manual Driver Installation for the ATI Rage XL Display Adapter