IMPORTANT SAFETY INFORMATION.

 

READ ALL INSTRUCTIONS BEFORE USING.

GEApplances.com

PROPER INSTALLATION

This appliance must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet, you can receive one by visiting GEAppliances.com or by calling 800.GE.CARES (800.432.2737). In Canada visit www.GEAppliances.ca or call 888.561.3344.

„Properly ground appliance to conform with all governing codes and ordinances. Follow details in Installation Instructions.

„Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which could cause permanent damage and invalidate the warranty.

„Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.

„Remove all sharp packing items and dispose of all shipping materials properly.

Exhaust/Ducting

1 All dryers MUST be exhausted to the outside to prevent large amounts of moisture and lint from being blown into the room.

2 Use only rigid metal 4” diameter ductwork inside the dryer cabinet. Use only UL approved rigid metal or flexible metal 4” diameter ductwork for exhausting to the outdoors. Never use plastic or other combustible, easy-to-puncture ductwork.

For complete details, follow the Installation Instructions.

WARNING!

YOUR LAUNDRY AREA

„Keep the area underneath and around your appliances free of combustible materials, (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapors and liquids.

„Keep the floor around your appliances clean and dry to reduce the possibility of slipping.

„Keep all laundry aids (such as detergents, bleaches, etc.) out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid injury.

„Never climb on or stand on this stacked unit – Laundry Center.

„Do not allow anyone, in particular children, to climb on, hang from, stand on, play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.

„Do not store items that may burn or melt (such as clothing, paper material, plastics or plastic containers, etc) on top of the appliance nor hang them from the door.

„Keep the area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust and dirt.

„Do not obstruct the flow of ventilating air. Do not stack or place laundry or throw rugs against the front or back of the dryer.

3

Page 3
Image 3
GE GTUP270, GTUP240, GUAP240, GTUN275, GUAP270 owner manual Proper Installation, Your Laundry Area

GUAP270, GUAP240, GTUN275, GTUP240, GTUP270 specifications

The GE GTUP270, GTUP240, GTUN275, GUAP240, and GUAP270 are advanced gas turbine models designed and manufactured by General Electric (GE) to meet the rigorous demands of today's power generation market. These turbines are known for their efficiency, reliability, and innovative engineering, addressing the needs of both utility and industrial applications.

The GTUP270 is a robust unit that combines high efficiency with low emissions, making it suitable for both base load and peaking power generation. It features a modular design, allowing for easy maintenance and reduced downtime. The turbine utilizes advanced materials and cooling technologies to withstand high operational temperatures, achieving superior performance under varying load conditions.

The GTUP240 is slightly smaller yet equally efficient, designed for quick-start applications. Its compact footprint and lightweight design make it an attractive option for locations with space constraints. The GTUP240 leverages digital controls and predictive maintenance tools to optimize performance and minimize operational costs, reflecting GE's commitment to integrating cutting-edge technology into its products.

The GTUN275 expands the range of GE's offering, providing a flexible solution for combined cycle plants. This turbine is optimized for fuel efficiency and equipped with advanced aerodynamic designs, allowing it to operate at high pressure ratios. Its ability to deliver enhanced operational flexibility makes it ideal for balancing renewable energy sources and managing grid stability.

The GUAP240 is specifically designed for industrial applications, boasting rugged construction to handle harsh operating environments. With a focus on fuel flexibility, this turbine can utilize various fuels, including natural gas and liquid fuels, ensuring continuous operation in different scenarios. Its enhanced heat recovery capabilities allow for improved overall plant efficiency.

The GUAP270 is a larger variant, providing increased power output without sacrificing efficiency. It incorporates GE's latest technologies in cooling and combustion systems, resulting in lower emissions and reduced environmental impact. This model is also designed for easy integration into existing power plants, providing a cost-effective solution for operators looking to upgrade their facilities.

In summary, the GE GTUP270, GTUP240, GTUN275, GUAP240, and GUAP270 represent the pinnacle of gas turbine technology, offering a range of features that cater to different operational needs. With an emphasis on efficiency, flexibility, and low emissions, these turbines are engineered to support a sustainable energy future while ensuring maximum uptime and reliability for power generation facilities.