Before you call for service…

GEAppliances.com

 

 

Troubleshooting Tips

Save time and money! Review the charts on the following pages, or visit GEAppliances.com.

In Canada, visit GEAppliances.ca. You may not need to call for service.

Water

Possible Causes

What to do

 

 

 

Too many suds

Too much detergent

Measure your detergent carefully. Use less soap if you have soft water, a

smaller load or a lightly soiled load.

 

 

 

Using too much

Use less detergent. Use less soap if you have soft water, a smaller load or a

 

detergent

lightly soiled load.

 

Fill hoses or drain

Make sure hose connections are tight at faucets and rubber washers are

 

hose is improperly

installed. Make sure end of drain hose is correctly inserted in and secured to

 

connected

drain facility.

Water leaks

Household drain may

Check household plumbing. You may need to call a plumber.

 

be clogged

 

 

 

Constant water

Tighten hoses at the faucets and turn the water off after

 

pressure to the fill

each use.

 

hoses at the water

Check condition of the fill hoses; they should be replaced

 

source

every 5 years.

 

Cooler water

 

 

temperatures provide

New laundry detergents have been formulated to work with cooler water

 

improved energy

temperatures without affecting wash performance.

 

efficiency

 

 

Water supply

Turn both hot and cold faucets fully on and make sure hoses are connect-

Water temperature

is turned off or

ed to correct faucets.

seems incorrect

improperly connected

 

 

Water valve screens

Turn off the water source and remove the water connection hoses from the

 

upper back of the washer. Use a brush or toothpick to clean the screens in

 

are stopped up

 

the machine. Reconnect the hoses and turn the water back on.

 

 

 

House water heater is

Make sure house water heater is delivering water at 120°F–140°F (48°C–

 

not set properly

60°C).

Water pumped

Lid lifted or cycle was

Reset cycle.

out before cycle is

put in pause for over

 

complete

24 hours

 

 

Drain hose is kinked

Straighten drain hose and make sure washer is not sitting on it.

Water won’t drain

or improperly

Top of drain outlet should be less than 8 ft (2.5 m) above floor.

 

connected

 

Washer pauses during

This is normal

The washer may pause during the spin cycle to remove soapy water more

spin cycle

 

efficiently.

Can hear but not see

 

The pump pleaves a little water in its intake and this is diluted with clean

water at the end of

This is normal

rinse water.

the cycle

 

 

 

 

 

 

13

Page 13
Image 13
GE GTUP270, GTUP240 Before you call for service…, Are stopped up, Machine. Reconnect the hoses and turn the water back on

GUAP270, GUAP240, GTUN275, GTUP240, GTUP270 specifications

The GE GTUP270, GTUP240, GTUN275, GUAP240, and GUAP270 are advanced gas turbine models designed and manufactured by General Electric (GE) to meet the rigorous demands of today's power generation market. These turbines are known for their efficiency, reliability, and innovative engineering, addressing the needs of both utility and industrial applications.

The GTUP270 is a robust unit that combines high efficiency with low emissions, making it suitable for both base load and peaking power generation. It features a modular design, allowing for easy maintenance and reduced downtime. The turbine utilizes advanced materials and cooling technologies to withstand high operational temperatures, achieving superior performance under varying load conditions.

The GTUP240 is slightly smaller yet equally efficient, designed for quick-start applications. Its compact footprint and lightweight design make it an attractive option for locations with space constraints. The GTUP240 leverages digital controls and predictive maintenance tools to optimize performance and minimize operational costs, reflecting GE's commitment to integrating cutting-edge technology into its products.

The GTUN275 expands the range of GE's offering, providing a flexible solution for combined cycle plants. This turbine is optimized for fuel efficiency and equipped with advanced aerodynamic designs, allowing it to operate at high pressure ratios. Its ability to deliver enhanced operational flexibility makes it ideal for balancing renewable energy sources and managing grid stability.

The GUAP240 is specifically designed for industrial applications, boasting rugged construction to handle harsh operating environments. With a focus on fuel flexibility, this turbine can utilize various fuels, including natural gas and liquid fuels, ensuring continuous operation in different scenarios. Its enhanced heat recovery capabilities allow for improved overall plant efficiency.

The GUAP270 is a larger variant, providing increased power output without sacrificing efficiency. It incorporates GE's latest technologies in cooling and combustion systems, resulting in lower emissions and reduced environmental impact. This model is also designed for easy integration into existing power plants, providing a cost-effective solution for operators looking to upgrade their facilities.

In summary, the GE GTUP270, GTUP240, GTUN275, GUAP240, and GUAP270 represent the pinnacle of gas turbine technology, offering a range of features that cater to different operational needs. With an emphasis on efficiency, flexibility, and low emissions, these turbines are engineered to support a sustainable energy future while ensuring maximum uptime and reliability for power generation facilities.