ASSEMBLYF
Assembly Tool
Lock Nut
Pull Up
Steering Column
3 |
Rounded Side Up
5 | SIDE VIEW |
• Turn the vehicle upright. |
• Pull the handlebar up to be sure the steering column is secure. |
• If you can remove the steering column, you have not assembled |
•Place the lock nut (rounded side up) on to the end of the steering column.
•Tighten the lock nut firmly using the closed end of the assembly tool.
the steering column retainer correctly. Please refer back to assembly |
steps 3 and 4. |
Steering
Column
Cap
4 |
•“Snap” the steering column cap over the lock nut.
Handlebar
Connector
Motor
Connector
6 | REAR VIEW |
• Plug the handlebar connector into the motor connector.
9 | |
|
|