CONFIRM POWER-OFF STATUS Make sure all the units are turned off.

EN51

PUSH-OPEN Button

Connection To A Video Unit Equipped With A DV Connector

Connection to the Digital Printer GV-DT3 (optional) allows you to print out the images or to transfer the captured image from the Digital Printer to a personal computer. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing (pg. 53), which offers virtually no image or sound deterioration.

To DV IN/OUT

Core filter

DV cable (optional)

 

Core filter

To DV IN

To DV

connector

connector

 

Video unit equipped

 

with a DV input

 

connector

 

To PC

 

connector

Digital Printer

PC

 

 

connection

 

cable

1

2 CONNECT CAMCORDER TO PRINTER OR VIDEO UNIT EQUIPPED WITH DV INPUT CONNECTOR

Press PUSH-OPENand open the LCD monitor fully. Make connections to the device you want to connect to using the DV cable, as shown in the illustration.

3 CONNECT PRINTER TO PC (IF NECESSARY)

Connect a PC connection cable to the printer’s PC connector and the PC’s RS-232C connector.

4 TURN ON POWER

Turn the camcorder's Power Switch to “ ”, “ ” or “ ” while pressing down the Lock Button located on the switch and turn on the other units.

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (pg. 7).

For Digital Dubbing, this camcorder can be connected

only to one device at a time. This camcorder can also be used as a recorder (pg. 53).

Also refer to the instruction manuals of the connected units.

Be sure to use a DV cable with the core filter.

Be sure to wind the DV cable twice around the core filter attached to the end connected to the camcorder.

To RS-232C

PC

Page 51
Image 51
JVC GR-DVL9600 specifications Connection To a Video Unit Equipped With a DV Connector, Connect Printer to PC if Necessary