JVC GR-DVL9600 specifications 14 EN, Recording Basic Recording, Load a Cassette, Start Shooting

14EN

RECORDINGBasicRecording

OPEN/EJECT Switch NOTE:

Recording Start/Stop Button

Power lamp

		OFF
	Y
	A
P	L	5S

Lock Button

Power Switch

Tally lamp

(lights while recording is in progress)

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (☞ pg. 6)

●Recording Mode Setting (☞ pg. 10)

●Grip Adjustment (☞ pg. 11)

●Viewfinder Adjustment (☞ pg. 11)

1 LOAD A CASSETTE

Slide OPEN/EJECT in the direction of the arrow then swing the cover open until it locks. The holder opens automatically.

Insert a tape and press “PUSH HERE” to close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

Shooting While Watching The Viewfinder

2 ENTER RECORD-STANDBY MODE Make sure the LCD monitor is closed and locked. Set the Power Switch to the camera position (“ ”, “ ”, “5S” or “ ”) while pressing down the Lock Button located on the switch, then pull out the viewfinder fully.

•The lens cover opens, the power lamp lights and the camcorder enters the Record-Standby mode.

•The scene you are aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

3 START SHOOTING

Press the Recording Start/Stop Button.

•“ ” appears in the viewfinder while recording is in progress.