JVC GR-DVL9600 54EN, Installing The Battery, Pull OUT Battery Holder, Insert Battery in Holder

54EN	USING THE REMOTE CONTROL UNIT
	The Full-Function Remote Control Unit can operate this
	camcorder from a distance as well as the basic operations
	(Playback, Stop, Pause, Fast-Forward and Rewind) of your
	VCR. This remote control unit makes additional playback
	functions possible.
2	Installing The Battery
	The remote control uses one lithium battery (CR2025).
1 3
	PULL OUT BATTERY HOLDER
1	1 Pull out the battery holder while pressing the knob as
	shown.
Knob	INSERT BATTERY IN HOLDER
	2 Insert the battery in the holder, and be sure to have
	the “+” mark visible.

3 RE-INSERT HOLDER

Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries (☞ pg. 2).

Remote sensor

Transmitted beam effective area

5m	15°
		°
°		30
30	15°

When using the remote control, be sure to point it at the remote sensor. The illustra- tion shows the approximate transmitted beam effective area for indoor use.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.