JVC GR-DVL9600 Playback Basic Playback, Rewind or Fast-forward the tape, Play Back, Stop Playback

PLAYBACKBasicPlayback

STOP (5) Button		1
	REW (2) Button

FF(3) Button

PLAY/PAUSE (6/4) Button

EN43

LOAD A CASSETTE

First press PUSH-OPENand open the LCD monitor fully.

Slide OPEN/EJECT in the direction of the arrow, then swing the cassette cover open until it locks. The holder opens automatically.

Insert a tape and press “PUSH HERE” to close the cassette holder.

		SELECT OPERATION MODE
PUSH-OPEN Button	Speaker	2 Set the Power Switch to “ ” while pressing down
		the Lock Button located on the switch. The power
		lamp lights.

Power Zoom Lever (VOL.) OPEN/EJECT Switch

Power lamp

PLA

Y

O
F	Lock Button
F

5S

3 PLAY BACK

Press PLAY/PAUSE (6/4). The playback picture appears.

4 STOP PLAYBACK

Press STOP (5).

Rewind or Fast-forward the tape

Press REW (2) to rewind, or FF (3) to fast-forward the tape during Stop mode.

NOTES:

●If Stop mode continues for 5 minutes when the power supply is a battery pack, the camcorder shuts off automati- cally. To turn on again, set the Power Switch to “OFF”, then

to “ ”.

●The playback picture can also be viewed in the viewfinder

(with the viewfinder pulled out) or on a connected TV (☞ pg. 48, 49). Camcorder operation is the same as described in this section.

●You can also view the playback picture on the LCD monitor with it flipped over and retracted.

●LCD monitor/viewfinder indications:

•When power is supplied from the battery pack: the

“ ” battery pack remaining power indicator is displayed on the LCD monitor when it is turned on.

When power is supplied through the DC cord: “ ” does not appear.

•During Stop mode, none of the indications are displayed in the viewfinder.

●Copy guarded tapes cannot be played back. The screen

Power Switch becomes blue back.

LCD monitor/Viewfinder Indication

Tape running indicator

Speaker (or Headphones) Volume Control

You can adjust the speaker (or headphones connected to the headphones connector) volume by pushing the Power Zoom Lever.

1 ADJUST VOLUME

If you want to turn up the volume . . .

.... push the Power Zoom Lever (VOL.) towards “+”.

If you want to turn down the volume . . .

.... push the Power Zoom Lever (VOL.) towards “–”.