JVC GR-DVL9600 specifications 10 EN, Recording Mode Setting, SET Recording Mode, Recording Menu

10EN

GETTINGSTARTED(cont.)

Recording Mode Setting

Set depending on your preference.

MENU Button

Power lamp

		F
	F
Y	O		5S
A
L
P

Lock Button

Select Dial Power Switch

Display

1 SELECT OPERATION MODE

Set the Power Switch to “ ”, “5S” or “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully.

•The power lamp comes on and the camcorder is turned on.

2 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.

3 SET RECORDING MODE

First move the highlight bar to “REC MODE” by rotating the Select Dial. Press the Select Dial and the parameter “SP” or “LP” is highlighted. Select “SP” or “LP” by rotating the Select Dial. Press the Select Dial twice to exit from the Recording Menu.

•Insert Editing or Audio Dubbing is impossible on a tape recorded in the LP mode.

•“LP” (Long Play) is more economical, providing 1.5 times the recording time.

4	REC MODE		SP
	WIDE MODE		OFF
	ZOOM		40X
	DIS		OFF
	GAIN UP		AGC
	FLASH		AUTO
	TO DATE / TIME MENU
	TO SYSTEM MENU
	END	– – – – –6– – – – –
4REC MODE
			SP
	WIDE MODE		OFF
	ZOOM		40X
	DIS		OFF
	GAIN UP		AGC
	FLASH		AUTO
	TO DATE / TIME MENU
	TO SYSTEM MENU
	END	– – – – –6– – – – –

Recording Menu

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

Recording mode indicator

SP

– – – – –6– – – – –

SPLP