JVC GR-DVL9600 specifications Make Connections, Select Scenes

EN59

To EDIT

To

S-VIDEO OUT

Open the cover.

To AV OUT

MAKE CONNECTIONS

Also refer to pg. 48, 49 and 51.

1 CONNECT TO . . .

JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A.EDIT CONNECTOR

Connect the editing cable to the R.A.EDIT connector.

VCR OTHER THAN TYPE OR

Connect the editing cable to the RM-V711U’s PAUSE-IN connector.

S-Video cable (provided)

Editing cable (provided)

To Remote

PAUSE

A/V cable (provided)

To AUDIO, VIDEO and

S-VIDEO IN connectors

VCR

2 PREPARE CAMCORDER

Insert a recorded tape and set the Power Switch to

“ ”.

3 PREPARE VCR

Turn the power on, insert a recordable tape and engage the AUX mode (refer to VCR’s instructions).

SELECT SCENES

4 START SOURCE PLAYBACK

First set the Power Switch to “ ” while pressing down the Lock Button located on it. Press PLAY (4) and then press R.A.EDIT ON/OFF on the remote control. Make sure to point the remote control at the camcorder’s remote sensor.

To PAUSE-IN

TV

T W

DISPLAY

FADE/WIPE

PLAY

RM-V711U R.A.EDIT

(provided)ON/OFF

•The Random Assemble Editing Menu appears.

5 EXECUTE FADE/WIPE IN (IF NECESSARY)

Press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You cannot use a Picture Wipe/Dissolve at the beginning of Program 1.

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound

Mode Display, press DISPLAY on the remote control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 46) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press IND. ON/OFF on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.

●When editing on a video unit equipped with DV input connector, the DV cable can be connected instead of the S-Video cable and Audio/Video cable.

CONTINUED ON NEXT PAGE