EN7
1
2
2

12

NOTES:
●
The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from 110 V
to 240 V.
●
For other notes,
Z
pg. 6.
To battery
pack mount
DC OUT terminal
To AC outlet
AC Power
Adapter/Charger
AA-V68EA
DC Cord
ATTENTION:
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.

INFORMATION:

The High Capacity battery pack BN-V856U (optional) provides approx. 7 hours of recording time when the
viewfinder is on and the LCD monitor is off.
It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the
optional AA-V80EG AC Power Adapter/Charger.

USING THE BATTERY PACK

1
TILT VIEWFINDER UPWARD
2
ATTACH BATTERY PACK
With the arrow on the battery pack pointing
downward, push the battery pack slightly against the
battery pack mount 1, then slide down the battery
pack to attach it 2.
•
If the battery pack is attached with its mark set
in the wrong direction, a malfunction may occur.
To Detach The Battery Pack . . .
.... tilt the viewfinder upward and slide the battery pack
up slightly while pressing the Battery Release Button to
detach it.
NOTES:
●
Continuous shooting is possible when the temperature is
approx. 20˚C.
●
However, continuous shooting capability is reduced
significantly under the following conditions:
•
The temperature is below 10˚C.
•
Zoom or Record-Standby mode is engaged repeatedly.
•
The LCD monitor is used repeatedly.
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
Battery Release Button
Power cord

USING AC POWER

Use the AC Power Adapter/Charger (connect as
shown in the illustration).
Approximate recording time
Battery
LCD monitor on/ LCD monitor off/ LCD monitor on/
pack
Viewfinder off Viewfinder on Viewfinder on
BN-V607U 50 min. 65 min. 45 min.
BN-V615U 100 min. 130 min. 90 min.
BN-V856U 6 hrs. 7 hrs. 30 min. 5 hrs. 30 min.