Turn off the camcorder.

USERMAINTENANCE

After Use

EN71

Remove.

OPEN/EJECT Switch

PUSH HERE

1

2 Slide OPEN/EJECT in the direction of the arrow, then

swing the cover open until it locks. The cassette holder opens automatically. Remove the cassette.

3 Press “PUSH HERE” to close the cassette cover.

4 Press the Battery Release Button and remove the battery pack.

Cleaning The Camcorder

PUSH-OPEN Button

Battery Release

 

Button

4

1 CLEAN EXTERIOR Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

2 CLEAN LCD MONITOR

Press PUSH-OPENand open the LCD monitor. Wipe gently with the provided cleaning cloth or a commer- cially available soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3 CLEAN LENS

Blow it with a blower brush, then wipe gently with lens cleaning paper.

5

6

7

 

 

Cover

 

 

Blower brush

4 PULL OUT VIEWFINDER FULLY

5 TILT VIEWFINDER VERTICALLY Tilt the viewfinder upward to 90 degrees.

6 OPEN COVER

Open the cover located on the bottom of the viewfinder.

7 CLEAN VIEWFINDER Remove dust using a blower brush.

8 PUSH VIEWFINDER BACK IN Close the cover until it locks in place. Tilt the viewfinder horizontally, and push it back in.

NOTES:

Avoid using strong cleaning agents such as benzine or alcohol.

Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

Mold may form if the lens is left dirty.

When using a cleaner or chemically treated cloth refer to the cautions of each product.

Page 71
Image 71
JVC GR-DVL9600 specifications After Use, Remove