JVC GR-DVL9600 Manual White Balance Operation, Enter Setting, To Change The Tint For Recording

White paper

Power lamp

		F
	F
Y	O		5S
A
L
P

Lock Button

Select Dial Power Switch

Display

EN41

Manual White Balance Operation

If the camera is operating in Manual mode “ ” or “ ”, perform a Manual White Balance when shooting under various types of lighting.

1 SELECT OPERATION MODE Follow steps 1 through 4 of the white balance adjustment (☞ pg. 40), select “ MAN.”.

2 SET MANUAL WHITE BALANCE Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.

3 ENTER SETTING

Press the Select Dial until the begins blinking.

•When the setting is completed, the stops blinking.

4 EXIT MANUAL WHITE BALANCE ADJUSTMENT

Press the Select Dial. The indication “W.BAL.” changes to “MANUAL” and only the Manual White

Balance indicator is displayed.

To Change The Tint For Recording . . .

.... in step 2, substitute colored paper for white. The white

	FOCUS	AUTO
	EXPOSURE	AUTO
4	W. BALANCE	AUTO
	FADER	OFF
	/ WIPE
	P. AE	OFF
	/ EFFECT	0
	FLASH ADJ.
	END

Manual Mode Item Menu

balance is adjusted based on the colour, changing the tint. Red paper — deeper green; blue paper — orange; yellow paper — deeper purple.

NOTES:

● In step 2, it may be difficult to focus on the white paper

in some circumstances. In such a case, adjust focus

manually (☞ pg. 37).

● A subject can be shot under various types of lighting

MANUAL	Manual White
	Balance Adjustment

conditions indoors (natural, flourescent, candlelight,

etc.). Because the colour temperature is different

depending on the light source, the tint of the subject will

differ depending on the white balance settings. Use this

function for a more natural result.

● Once you adjust white balance during Manual White

Balance operation, the setting is retained even if the

power is turned off or the battery removed.