30EN

RECORDING

AdvancedFeatures(cont.)

Date/Time Menu Explanations

ON SCREEN

OFF

Keeps the camcorder’s display from appearing on the connected TV

 

 

screen.

 

ON

Makes the camcorder's display appear on screen when the camcorder

 

 

is connected to a TV.

 

 

 

DISPLAY

ON

Makes the date/time settings appear in the camcorder (pg. 20).

 

OFF

Keeps the date/time settings from appearing in the camcorder.

 

 

 

DATE/TIME

Allows you to set the current date and time (pg. 8).

 

 

 

System Menu Explanations

 

 

 

 

TELE MACRO

OFF

Usually the distance to a subject where the lens is in focus depends

 

 

on the zoom magnification. Unless there is a distance more than 1m

 

 

to the subject, the lens is out of focus at the maximum telephoto

 

ON

setting. When set to “ON”, you can shoot a subject as large as

 

possible at a distance of approx. 60 cm.

 

 

 

 

•Depending on the zoom position, the lens may go out of focus.

 

 

 

SCENE

5S

pg. 21.

 

5SD

pg. 21.

 

 

 

 

ANIM.

Allows you to record a 1/3-second clip. By using an inanimate object

 

 

and changing its position between shots, you can record the subject

 

 

as though it is moving (pg. 21).

BEEP/TALLY

ON

The tally lamp comes on to signal the start of recording.

 

 

The beep sounds when the power is turned on or off, and at the

 

 

beginning and end of recording. Also to activate the shutter sound

 

 

effect (pg. 25).

 

OFF

The tally lamp remains off at all times.

 

 

Even though not heard while shooting, shutter sound is recorded on

 

 

the tape.

WIND CUT

OFF

Disengages the function which cuts down on noise created by wind.

 

ON

Helps cut down on noise created by wind.

 

 

•“ ” appears.

 

 

•The quality of the sound will change. This is normal.

 

 

 

SOUND MODE

32 kHz

Enables recording of stereo sound on four separate channels, and is

 

 

recommended for use when performing audio dubbing with another

 

 

digital camcorder.

 

48 kHz

Enables recording of stereo sound on two separate channels.

 

 

 

ID NUMBER

This number is necessary when connecting the camcorder to a device such as a

 

computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting

 

is 06.

 

 

 

 

DEMO. MODE

OFF

Automatic demonstration will not take place.

 

ON

Demonstrates certain functions such as Program AE with special

 

 

effects, etc., and can be used to confirm how these functions operate.

 

 

When “DEMO. MODE” is set to “ON” and the Recording Menu is

 

 

closed, demonstration starts.

NOTES:

If a tape is in the camcorder, the demonstration cannot be turned on.

By turning off the camcorder, “DEMO. MODE” is set to “OFF” automatically.

: Factory-preset

Page 30
Image 30
JVC GR-DVL9600 specifications 30 EN, Date/Time Menu Explanations, System Menu Explanations