JVC GR-DVL9600 64 EN, Audio Dubbing, Begin Dubbing, Pause During Dubbing, Stop Dubbing

64EN

USINGTHEREMOTECONTROLUNIT(cont.)

Speaker Audio Dubbing

Display

	PL
	A
	Y
	O
	F
	F
	5S
	Lock Button
Audio Dub Standby mode	Power Switch

Located beneath the cover.

AV OUT (headphones) connector

External microphone input connector

Remote sensor

	Stereo
	microphone
T W	AUDIO
DISPLAY	MONITOR
	A.DUB

PLAY

PAUSE

RM-V711USTOP (provided)

The audio track can be customized only when recorded on the 32 kHz mode (☞ pg. 30).

NOTES:

●Audio Dubbing is not possible on a tape recorded at

48 kHz, on a tape recorded in the LP mode or on a blank portion of a tape.

●To perform Audio Dubbing while watching in the television, make connections (☞ pg. 48).

1 FIND EDIT-IN POINT

Play back the tape to locate the point where editing will start, then press PAUSE (6).

2 ENGAGE AUDIO DUB STANDBY While holding A.DUB (e) on the remote control, press PAUSE (6). “6e” appears.

3 BEGIN DUBBING

Press PLAY (4), then begin “narrating”.

•Speak into the microphone.

4 PAUSE DURING DUBBING

Press PAUSE (6).

5 STOP DUBBING

Press STOP (5).

NOTES:

●While an optional microphone is connected, the built-in microphone is disabled.

●When editing onto a tape that was recorded at 32 kHz, the old and new soundtracks are recorded separately.

●To select the desired sound for playback, press AUDIO MONITOR on the remote control.

●If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.

●If feedback or howling occurs during TV Playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.

●Sound is not heard from the speaker during Audio Dubbing. To hear sound, connect optional headphones to the AV OUT (headphones) connector.

Be sure to use the core filter (provided) when using headphones.

●If you change from 32 kHz to 48 kHz in mid-recording and then use the tape for Audio Dubbing, it is not effective from the point where 48 kHz recording began.

●During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz or a blank portion, Audio Dubbing stops and “ERROR! REFER MANUAL” appears.

Recording sound	Display	Output sound
32 kHz	FULL SOUND	Original and new tracks are combined and output in stereo.
	SOUND 2	New track is output on both “L” and “R” channels in stereo.
	SOUND 1	Original track is output on both “L” and “R” channels in stereo.