Functional Overview
Remote control
Notes:
–First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example).
–Then select the desired function (2, 4, ¢ for example).
1SOURCE
–to select the relevant active mode:TAPE, DISC, TUNER or AUX/TV.
–TUNER: toggles between FM and MW band.
–AUX/TV: toggles between
2DISC MENU (disc mode only)
–to enter or exit the disc contents menu.
3 SYSTEM MENU (disc mode only)
–to enter or exit the system menu bar.
4 3 / 4 / 1 / 2
–in Tuner mode, to select a preset radio station number ( 1 or 2).
–to select movement direction in disc contents menu/system menu bar.
54 / ¢
–in Disc mode, press to skip to the previous/next chapter/track.
–in Disc mode, press and hold to fast reverse/ forward the disc.
–in Tuner mode, to tune to a lower or higher radio frequency.
6PLAY/PAUSE 2;
–to start or interrupt disc playback.
7 STOP 9
–to stop playing the disc.
8SURROUND
–to select multichannel surround (Dolby Digital, DTS and VSS) or stereo sound effect.
9SOUND
–to select various sound effect: CONCERT, DRAMA,
0MODE
–to select the REPEAT or SHUFFLE function.
! REPEAT A-B
–to repeat a specific section on a disc.
@POWER 2
–to switch to standby mode.
# Numeric Keypad (0-9)
–to enter a track/title number of the disc.
–to enter a number of preset radio stations. $ VOL +/-
–adjust the volume level.
%OK
–to exit or confirm the selection.
^ RESUME
–to continue disc playback after interruption.
& MUTE
–to interrupt or resume sound reproduction.
* NIGHT (Dolby Digital mode only)
–to optimize the dynamic effect of the sound output.
(DIM
–to select different brightness for the display.
)SLEEP
–to set the sleep
¡SUBW
– to adjust the subwoofer’s level.
REAR +/-(for 5.1 speaker connection only)
– to adjust the rear speakers’ level.
CENTER
– to adjust the center speaker’s level.
TV VOL+/-
– to adjust Philips’ television volume level.
English
17
