Philips FW-D550 Tuner Operations, Tuning to radio stations, Presetting radio stations, English

Tuner Operations

English

IMPORTANT!

–Make sure FM and MW antennas are connected.

Tuning to radio stations

1Press TUNER to select “FM XX” or “MW XX”.

2Press and hold 4 / ¢ on the remote control or 1 / ¡ on the system until the frequency indication starts to change, then release.

➜The next radio station will be tuned automatically.

➜i lights up for FM stereo reception.

3To tune a weak station, press 4 / ¢ on the remote control or 1 or ¡ on the system to

auto search until a radio station with sufficient signal strength is found.

●If you use ¡ / ™ on the system for frequency tuning, make sure the system is in frequency tuning mode. If not, press TUNER.

2Press and hold PROGRAM until “AUTO” appears on the display.

➜PROG will start to flash.

➜The system will start to search all radio stations on the FM band, then MW band.

➜All radio stations with strong signal strength will be stored automatically.

➜The system will stop searching when all available radio stations are stored or when the memory of 40 preset radio stations is full.

➜The first preset radio station will then be played when completed.

To stop storing the automatic preset

●Press PROGRAM or 7 on the system.

Note:

– If no preset number is selected, automatic preset will begin from “P 01” and all your former presets will be overridden.

Presetting radio stations

You can store up to 40 preset radio stations in the memory, starting from FM and followed by MW bands.

Automatic preset programming

You can start automatic presetting from a selected preset number.

1Press TUNER (BAND) to select TUNER mode. ➜ The current radio frequency will appear on the display.

To begin automatic preset from a desired preset number

●Press O / P, 2 / 3 or numeric keys (0- 9) to select the desired preset number.

34