Philips FW-D550 Dubbing tapes, Disc synchro recording, When recording is in progress, English

Prepare the source to the recorded. DISC – load the disc(s)

TUNER – tune to the desired radio station. TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left.

AUX/TV – connect external equipment.

3

IMPORTANT!

– Recording is permissible if copyright or other rights of third parties are not infringed upon.

– Recording is possible only in tape deck 2.

Preparation for recording

1 Press TAPE (TAPE 1•2) to select TAPE 2.

2 Load a recordable tape into tape deck 2 with the full spool to the left.

Tape Operation/Recording

When recording is in progress

1Press DISC, TUNER or AUX/TV to select the source.

●You can connect a microphone to record the mixed sound in tape deck 2.

2Start to play the selected source.

3Press REC to start recording.

To stop recording

●Press 9 on the system.

Dubbing tapes

1Load the prerecorded tape into tape deck 1. ● You can set the tape to the desired passage

where recording will start.

2Press DUBBING.

➜Playing and recording will start simultaneously.

➜“DBB 000” will be displayed.

●Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A for example, flip the tape to side B and repeat the procedure.

To stop dubbing

●Press 9.

Note:

– Press DUBBING twice for high speed dubbing, and the audio output will be muted at the same time.

English

Disc synchro recording

1Press DISC to select the disc.

●Press O or P to select a desired track to record.

●You can record programmed tracks in the order you want.

2Press REC to start recording.

➜ “REC” will flash, but the first 7 seconds of the start passage will not be recorded.

Selecting another track during recording

1Press 2; to interrupt recording.

2Press O or P to select another track.

3Press 2; to resume recording.

To stop recording

●Press 9.

➜ Recording and disc playback will stop simultaneously.

37