Philips FW-D550 Clock/Timer Operations, Viewing clock, Setting the timer, To deactivate the timer

3 Press DISC,TUNER or TAPE to select timer mode.The corresponÍding source will appear on the display.

DISC - load the disc.To start from the specific track programmed. (refer to page 24, Disc Operations - program favorite tracks”). TUNER - Tune to the desired radio station. TAPE2 - Load the prerecorded tape into tape deck 2.

4 Press O or P on the system to set hours .

5 Press 1 or ¡ on the system to set the minutes.

6 Press TIMER to store the start time.

➜ “TIMER ON” will be displayed for 3 seconds. ➜ The timer will start to work.

● At the preset time, the selected source will play before it switches to Eco Power

Clock/Timer Operations

English
-		-
1	2	3
		-

Viewing clock	2 Press TIMER to select timer mode.
The clock (if it is set) will be shown in Standby	➜ TIMER will start to flash.
	➜ The selected source will be displayed.
mode.

● Press DISPLAY to select 12-hour or 24-hour mode.

➜If the clock has not been set, “--:--“ will blink (1 kHz) until you set the clock.

Setting the clock - see page 19.

Setting the timer

The system can switch to DISC,TUNER or TAPE mode automatically at a preset time, serving as an alarm to wake you up.

IMPORTANT !

–Before setting the timer, ensure that the clock is set correctly.

–The timer will always be switched on once set.

–The timer will not start if a recording is in progress.

–The volume of the timer will increase gradually from the minimum level to the last tuned volume level.

–The system will bring the timer forward 1 minute to turn on.

–The time can be set in 24-hour mode.

1Press STANDBY ON on the system to STANDBY mode.

standby mode (if no button is pressed within the time frame).

To exit without storing the setting

●Press 7 on the system.

To deactivate the timer

●Press and hold TIMER for more than 3 seconds.

38