Philips FW-D550 Setting the video out, Setting the screen saver, Setting the PCM output, S-Video

	DVD Menu Operations
Setting the video out	Setting the digital output
Video Out selection enables you to choose the	Set Digital Output according to your optional
type of video output suitable for your DVD	audio equipment connections.
system.

English

PR PBY

SET S-VIDEO

S-VIDEO

–Select S-VIDEOif you have connected the S-VIDEO output to your TV system using S- VIDEO jack.

PR PB Y

–Select PR PB Y if you have connected the video output to your TV system using PR PB Y jack.

Note:

–You do not need to adjust the video output setting if you are using VIDEO jack (yellow) to connect the system to your TV system.

Setting the screen saver

P-SCAN

OFF

ON

SCREEN SAVER NOW ON

If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 1 mimute.The default setting is ON.

DIGITAL OUTPUT	OFF
PCM OUTPUT	ALL
	PCM ONLY
NIGHT MODE

CNTR DELAY

REAR DELAY

TEST TONE

SET SPDIF OFF

Off

Select this to deactivate the digital output.

All

Select this if you have connected the digital output to a piece of optional audio equipment that has a multichannel decoder.

PCM only

Select this if the external component is capable of processing digital signal input. After that, proceed to “Setting the PCM output”.

Setting the PCM output

DIGITAL OUTPUT
PCM OUTPUT
	PCM 96K
NIGHT MODE	PCM 48K

CNTR DELAY

REAR DELAY

TEST TONE

PCM 48K OUTPUT

PCM 96K

Select this if the optional audio equipment is capable of processing digital signal input with sampling rate of 96 kHz. However, if the sound output is distorted or there is no sound, select ‘48 kHz’.

PCM 48K

Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input, then convert to standard signal with sampling rate of 48 kHz.

Note:

–The PCM OUTPUT can be selected only when PCM ONLY is selected.

31