Assembly
Front Legs
1 | Base |
•Position the base so that the bottom is upright.
•Fit both front legs to the bottom of the base, as shown.
•Insert two screws into the front legs and tighten.
Microphone
Holder
3
•“Snap” the microphone holder to the side of the assembly.
Microphone
4
•Set the microphone into the micro- phone holder.
2
Rear Legs
•Fit both rear legs to the front legs, as shown.
•Insert four screws into the rear legs and tighten.
•Set the assembly upright.
3
