Fisher-Price P1384 manual Problems & Solutions, Problem Solution

Problems & Solutions
Problem	Solution
Receiver signal L.E.D. flashes	Receiver is out of range of transmitter. Move receiver closer to transmitter.
	Note: Range varies depending on surrounding conditions such as noise
	levels, physical obstructions and signal interference. Under optimal
	conditions, the range is up to 800 feet.
	Transmitter power is off. Turn transmitter power on.
	Loose power cord connection and transmitter power is off.
	Check transmitter power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light
	switch that controls power flow to wall outlet is on.
	Power is off because circuit breaker for room is off. Make sure house
	fuses and circuit breakers are on.
Receiver power/battery	Receiver power is off. Turn receiver power on.
L.E.D. does not light
	Batteries in receiver are weak or dead. Use AC adaptor as power source
	and to charge the battery.
	Power is off because circuit breaker for room is off. Make sure house
	fuses and circuit breakers are on.
	No power to wall outlet and power is off. Make sure light switch that
	controls power flow to wall outlet is on.
Receiver power/battery	Batteries in receiver are weak or dead. Use AC adaptor as power source
L.E.D. flashes	and to charge the battery.
Transmitter power L.E.D. does	Transmitter power is off. Turn transmitter power on.
not light
	Loose power cord connection and transmitter power is off.
	Check transmitter power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light
	switch that controls power flow to wall outlet is on.
	Power is off because circuit breaker for baby’s room is off. Make sure
	house fuses and circuit breakers are on.
You can hear conversations or	There is signal interference due to other nursery monitors on same
sounds from other homes	channel or cordless telephone use. The monitor should automatically
	find a new channel to avoid interference.
Receiver is not picking up sounds	You may need to pair the receiver and transmitter. Turn over the master
from transmitter	receiver and press the pairing button with a pen. Then, turn over the
	transmitter and press the pairing button with a pen. The signal L.E.D.
	on the receiver will flash and you will hear a tone. Repeat this procedure
	to pair the second receiver.

26