Fisher-Price T4841 manual Problems & Solutions, Problem Solution

Problems & Solutions

Problem	Solution
Receiver range indicator light flashes	Receiver is out of range of transmitter. Move receiver closer to transmitter.
and you hear beeping	Note: Range varies depending on surrounding conditions such as noise
	levels, physical obstructions and signal interference.
	Transmitter power is off. Turn transmitter power on.
	Loose power cord connection and transmitter power is off. Check
	transmitter power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light
	switch that controls power flow to wall outlet is on.
	Power is off because circuit breaker for room is off. Make sure house fuses
	and circuit breakers are on.
Receiver power L.E.D.	Receiver power is off. Turn receiver power on.
	The 3.6V NiMH battery pack (inside the receiver) is weak. Use the AC
	adaptor/charger as a power source as well as charge the battery.
	Power is off because circuit breaker for room is off. Make sure house fuses
	and circuit breakers are on.
	No power to wall outlet and power is off. Make sure light switch that
	controls power flow to wall outlet is on.
Receiver low battery indicator	The 3.6V NiMH battery pack (inside the receiver) is weak. Use the AC
appears on the screen	adaptor/charger as a power source and to charge the battery.
Transmitter power L.E.D. does not	Transmitter power is off. Turn transmitter power on.
light at all
	Check transmitter power cord plug-to-outlet connection.
	No power to wall outlet and transmitter power is off. Make sure light
	switch that controls power flow to wall outlet is on.
	Power is off because circuit breaker for baby’s room is off. Make sure
	house fuses and circuit breakers are on.
You can hear conversations or	There is signal interference due to other nursery monitors on same
sounds from other homes	channel or cordless telephone use. You may need to pair the receiver and
	transmitter. Press the pairing button on the side of the receiver with
	a paperclip until the power button L.E.D. blinks and the range indicator
	turns on. Then, press the pairing button on the back of the transmitter
	with a paperclip until the receiver range indicator turns off.
Clock/nap timer screen is not	Reset the receiver by removing the battery and replacing it in the receiver.
working or is functioning erratically
My voice does not seem to be	Make sure you are pressing and holding the Talk button on the receiver
projecting from the transmitter in
	Turn the volume up on the receiver.
baby’s room
	Make sure receiver power is ON.
	Release, press and hold the talk button and talk again.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor/charger are

damaged, please contact Fisher-Price®.

14