Crib Attachment
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Do not add additional strings or straps to attach to a crib. Check frequently.
Attachment Strap
Crib Rail
Strap Slot
Attached to Peg
Cribb Spindle
21
•Tie the soother strings to a crib spindle. NOTE: It is better to tie the strings in a knot than a bow, since a bow may be easily untied.
1
•Position the soother inside the crib.
•Wrap the attachment strap around the top of the crib rail.
•Slide the end of the attachment strap under the tab on the back of the soother.
•Fasten the attachment strap slot to the peg on the back of the soother.
NOTE: This soother should be snug against the crib rail and spindles. Use the strap slot that provides the tightest fit.
7" (18 cm)
31
•Make sure the distance between the bottom of the soother and the crib mattress is at least 7 inches (18 cm).
•If the distance is less than 7 inches
(18 cm), readjust the attachment strap to lift the soother; or lower the crib mattress.
5