1 Press the ON/OFF button for about 1 second.
hThe camera turns off.
HINT
To immediately activate the power save function
i Press the ON/OFF button briefly to active the power save function.
About the standby mode
i To turn off the camera only briefly, you can close the monitor unit to put the camera in the standby mode. The standby mode uses almost no power. When the monitor unit is opened again, the camera turns on immediately and you are ready to shoot or view images without any delay.
NOTE
If the K icon appears...
i When a picture is taken, the date and time it was captured is recorded with it. When the date and time cannot be recorded with the image because the date and time have not yet been set (page 113), the K icon appears. To have the date and time recorded with images, please make this setting before capturing images.
41English