iFast-moving subjects

Use the focus-lock function to lock the focus on an object at the same distance as the desired subject, then reposition the camera to compose the picture.

Hints for taking pictures

Muting the operation sounds

i The operation sounds that are generated, for example, when the still image shooting button, MENU button or SET button is pressed, as well as the audio guidance when you switch the mode, can be muted (page 116).

Where is the image and audio data saved?

i All the image and sound data is recorded on the card installed in the camera.

Taking pictures in backlight conditions...

i When taking pictures with the light coming from behind the subject, due to the characteristics of the lens, light lines or ghost patterns (flare phenomenon) may appear in the captured image. In this situation, it is recommended that you avoid taking pictures with the subject lit from behind.

While the image data is being recorded...

i While the multi-indicator is flashing red, the image data is being written to the memory, during which time it is not possible to capture another image. Another image can be captured after the flashing red indicator turns off.

However, even when the multi-indicator is flashing red, depending on the camera's internal memory remaining capacity, in some cases the next image can be captured about 2 seconds after shooting.

Checking the last image shot (instant review)

i After shooting a picture, you can immediately view it by pressing the SET button once.

i During instant review of a video clip, normal play, reverse play and pause are available (page 58).

i If you wish to delete the image (for a video clip, it must be in the pause or stop mode), toggle the SET button up to access the delete function.

i You can view other images while the instant review display is showing by toggling the SET button to the left or right.

i Cancel the instant review display (for a video clip, it must be in the stop mode) by toggling the SET button down.

English 46