Fitness Quest 491pr Assembly Foot Tube, Please Read ALL Instructions Carefully Before Assembling

NOTE: Occasionally our products contain components that are pre-lubricated at the factory. We recommend that you protect flooring, or anything else the parts may contact, with newspaper or cloth.

ASSEMBLY - Foot Tube

IMPORTANT

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.

FIGURE 1

Step 1. Remove the two M8 x 1.25 x 60 CAR- RIAGE BOLTS (1), M8 WASHERS (4) and M8 x 1.25 CAP NUTS (5) from the FRONT FOOT TUBE (2).

Step 2. Attach FRONT FOOT TUBE (2) to front of FRAME (3) with hardware removed in Step 1. Make sure to insert BOLTS through "square holes" first.

5

M8 x 1.25

CAP NUT 4 M8

WASHER

1

M8 x 1.25 x 60

CARRIAGE BOLT

3

FRAME

2

FRONT

FOOT FIGURE 1

TUBE

		9
		SUPPORT	Step 3.
		TUBE	5
			M8 x 1.25
			CAP NUT
			Step 4.
			4
			M8
			WASHER
5
M8 x 1.25			8
CAP NUT
			REAR
			FOOT
			TUBE
4			1
M8
		M8 x 1.25 x 60
WASHER	3
		CARRIAGE BOLT

FRAME

FIGURE 2

Remove the two M8 x 1.25 x 60 CAR- RIAGE BOLTS (1), M8 WASHERS (4) and M8 x 1.25 CAP NUTS (5) from the REAR FOOT TUBE (8).

Insert two M8 x 1.25 x 60 CARRIAGE BOLTS (1) through "square holes" in REAR FOOT TUBE (8), FRAME (3) and SUPPORT TUBE (9) and fasten with M8 WASHERS (4) and M8 x 1.25 CAP NUTS (5).

NOTE: It will be difficult to attach NUTS, but they will fit. DO NOT tighten these NUTS until you have completed Step 9.

FIGURE 2

5