STEP 5 – Stationary Handlebar Assembly
Remove the Allen Bolts, Washers and Nuts with Caps from the Stationary Handlebar and the Bolt and Washer from the Vertical Column. Position the Stationary Handlebar in place on the Vertical Column with the bolt hole at the bottom. Replace the Bolts, Washers, Nuts and Caps you just removed and tighten with the Wrench provided.
5
|
| left |
|
| swing arm |
vertical |
|
|
column | bolt | stationary |
| handlebar | |
| hole | |
|
|
looking from left side
STEP 6 – Computer Assembly
a) Remove the four Phillips Screws |
from the back of the Computer. |
b) Snap together Connectors for |
Computer, tucking the Wires inside |
the Vertical Column. Be careful |
not to pinch wires. |
The Book Holder can be attached |
to the Computer at any time. |
c) Attach the Computer using the |
four Screws removed in (a). |
Tighten with the Screwdriver |
computer
heart rate
receiver
connectors
book holder
Front
View
vertical column
6d |
|
|
four "C" batteries | battery | |
|
| door |
4 | 3 |
|
1 | 2 | back of |
|
| |
|
| computer |
|
| 6c |
provided. |
6b
Back |
View |
d)Remove Battery Door on the back of the Computer.
Insert four “C” Batteries (included) in numbered order and replace Battery Door.
vertical column |
STEP 7 –
Water Bottle
Holder Assembly
a)Remove Phillips Screws from Vertical Column. Line up Water Bottle Holder and attach to the Vertical Column by
b)At this time connect the Pulse Wires on both sides of the Vertical Column.
8
7b vertical column
pulse
pulsewires wires
remove and
water bottle
holder
remove and
7a
looking from the ng from left side of the unit eft side
he unit
STEP 8 – |
|
|
AC Adapter | main |
|
Insert AC Adapter | frame |
|
assembly | 8 | |
into front of unit, |
|
then plug into wall.
Assembly is now complete.
IMPORTANT:
Please read pages
9.5e Elliptical Trainer.
