STEP 1 – Main Frame Assembly
a)Remove the Allen Bolts, Washers, Nuts and Nut Caps from the Foot Base on the Main Frame Assembly.
Slip the Roller Tubes onto the Main Frame making sure the Roller Tracks are facing up and the Bolt Holes on the rear of the Roller Tubes are facing each other. To secure the Roller Tubes to the Base Frame replace the Bolts and Washers you just removed.
b)Remove the Allen Bolts and Washers from the rear of the Roller Tubes. Place the Stabilizer Bar (with the Warning Label up) between the Roller Tubes. Replace the Bolts and Washers you just removed.
c)Tighten all bolts with Wrench provided.
1a
main frame assembly
foot base
1b
remove bolts
and washers right
roller tube
1a
stabilizer
bar roller tracks
left roller tube
1a
STEP 2 – Foot Platform Assembly
NOTE: The Foot Platforms are interchangeable
a)Remove the Allen Bolts, Washers and Nylon Nuts from the bottom of the Foot Platform.
b)Note: This Step might be easier if you have a second person hold the Foot Tube or Foot Platform steady as you slide the Foot Platform on and secure it.
Position the Crank in the down stroke and carefully slide the Foot Platform Assembly onto the Front Foot Tube. Replace the Bolts and Washers you just removed in step (a). Tighten with Wrench provided.
foot platform 
assembly
2b
c)Carefully lay the Foot Platform down so the Roller seats itself into the Roller Track on the Roller Tube.
Repeat on other side.
2c |
Roller should |
seat itself in |
track |
front |
| |
foot tube |
| |
| main | |
| frame | |
connecting | crank | |
(in down | ||
arm | ||
stroke) | ||
|
6
