About the battery

Your FLO TV™ Personal Television comes with a manufacturer-supplied rechargeable lithium-ion battery. The FLO TV Personal Television is designed to use only the manufacturer-supplied battery. Battery performance depends on many factors, including features, settings, and accessories used on the FLO TV™ Personal Television. For battery time estimates, see “Battery life” on page 44.

Installing the battery

1.Open the viewing stand to reveal the back cover.

2.Remove the back cover by sliding it in the direction towards the side where the connectors and the FLO TV™ Personal Television’s buttons are located.

3.Align the battery’s exposed copper contacts with the battery connectors in the battery compartment then gently push the battery into place.

4.Replace the back cover.

Charging the battery

Your FLO TV™ Personal Television should be shipped with a partially charged battery.

A low battery notification can be manually dismissed, but you will want to connect the FLO TV™ Personal Television to a power charger to continue watching the FLO TV service.

TO CHARGE THE BATTERY

Provide power to the FLO TV™ Personal Television using one of the following methods:

1.Connect directly to a power outlet using the adapter.

2.Connect to a powered-on PC using the USB cable.

Once connected, the battery indicator LEDs light up one after another until the battery is fully charged. After disconnecting the charger, the LEDs remain lit for 5 seconds, indicating the power level, and then turn off.

You can safely recharge the battery at any time, even if it has a partial charge.

6