Fluke 1526 user manual Using the Lock Function to Measure Resistance

MegOhmMeter

Using the Meter

5.Exchange the red (+) and black (-) probes on the circuit and repeat steps 3 and 4 to reverse the polarity of the test current. The reading should be the same as the previous. This test is useful to detect corroded connections, which can cause different readings for both polarities.

Using the LOCK Function to Measure Resistance

The LOCK function is used to continuously supply the test current to the circuit to be tested. This is useful for making several measurements in succession without having to push and hold the TEST button for each measurement.

1.Press the TEST button, then press the LOCK button, then release both simultaneously.

2.You can now probe the desired test locations in succession.

3.Press LOCK or TEST to disengage the lock function.

Caution

The Meter cannot indicate if the circuit is live in this mode.

Ensure that the circuit is de-energized before connecting the test probes in this mode or the fuse may blow.

17