Enabling or Disabling Sleep Mode, Setting the Time

Users Manual

Enabling or Disabling Sleep Mode

The thermometer enters sleep mode if no button press occurs for 20 minutes.

Pressing any button wakes the thermometer and returns it to its previous state.

1.Press  or  until the display shows .

2.Press  to indicate that you want to change the sleep setting.

The display shows  if sleep mode is on and  if sleep mode is off.

3.Press  or  as needed until the display shows  or .

4.Press  to store the sleep setting in memory.

Sleep mode is enabled each time you turn on the thermometer and is automatically disabled in MIN MAX and logging modes.

1.Press  or  until the display shows the time if it is set or shows "- - : - -."

2.Press  to indicate you want to set the time. The left two digits blink.

3.Press  or  until the display shows the correct hour (24-hour format), and then press  to select.

The right two digits blink.

4.Press  or  until the display shows the correct minutes, and then press  to store the time in memory.

Note

Holding down  or  causes the number to change more quickly.