744
HART Mode Users Guide
Communication Operations
Figure 2 shows the HART Mode menu tree. Availability of some elements in the menus depends on which transmitter you are using, and whether the transmitter is configured by itself on a current loop or in a multidrop connection.
Viewing Process Variables
From the Active Device screen press the Process softkey to view more device variables and their continuously updated values. To see additional information, press the
softkey.
Setup Operations
The Setup softkey provides access to the following five setup functions:
∙Basic
∙Sensor
∙Device Identification
∙HART Output
∙HART Information
Basic
From the Active Device screen press the Setup and Basic softkeys to access the read/write Basic Setup screen. You can use this screen to clone a transmitter as described at the end of this manual.
pe08s.bmp
pe09s.bmp
