Fluke 744 manual Hart Output Hart Information

Documenting Process Calibrator HART Mode

Communication Operations

HART Output HART Information

From the Active Device screen press the Setup and HART Output softkeys to access the read/write HART Output screen. Here you can change the Poll Address (0 = single transmitter, any other address = multidrop), and control burst mode.

From the Active Device screen press the Setup and HART Information softkeys to access the read-only HART Information screen. This screen shows more complete information about the transmitter model, hardware and software revision numbers, and how many preambles it sends.

pe12s.bmp

pe13s.bmp

11