Fluke 744 manual Sensor, Device Identification, HART Mode Users Guide, pe11s.bmp pe10s.bmp

744

HART Mode Users Guide

Sensor

From the Active Device screen press the Setup and Sensor softkeys to access the read-only Sensor Setup screen. This is where you can view information about the sensor in the transmitter, including serial number, limits, and span. The limits shown are the absolute limits for the sensor. (The Upper Range Value (URV) and Lower Range Value (LRV) are different, and are viewable and programmable through the Basic Setup screen.)

Device Identification

From the Active Device screen press the Setup and Device Identification softkeys to view information about the transmitter. You can program the Tag, Message, Date, and Descriptor registers in the transmitter using this screen.

pe11s.bmp

pe10s.bmp

10