ambient relative humidity: 15–50%
pressure: 75kPa–106kPa
mains voltage within ±10% of nominal
vibrations in the calibration environment should be minimized
altitudes less than 2000 meters
indoor use only
2.3 Warranty
Fluke Corporation, Hart ScientificDivision (Hart) warrants this product to be
free from defects in material and workmanship under normal use and service
for a period as stated in our current product catalog from the dateof shipment.
This warranty extends onlyto the original purchaser and shall not apply to any
product which, in Hart’ssole opinion, has been subject to misuse, alteration,
abuse or abnormal conditions of operation or handling.
Software is warranted to operate in accordance with its programmed instruc-
tions on appropriate Hart products. It is not warranted to be error free.
Hart’s obligation under this warrantyis limited to repair o r replacemento f a
product which is returned to Hart within the warrantyperiod and is determined,
upon examination by Hart, to be defective.If Hart determines that the defect or
malfunction has been caused by misuse, alteration, abuse or abnormal condi-
tions or operation or handling, Hart will repair the product and bill the pur-
chaser for the reasonable cost of repair.
Toexercise this warranty, the purchaser must forward the product after calling
or writing an Authorized Service Center (see Section 1.4). The Service Centers
assume NO risk for in-transit damage.
THE FOREGOING WARRANTYIS PURCHASER’S SOLE AND EXCLU-
SIVE REMEDYAND IS IN LIEU OF ALL OTHER WARRANTIES, EX-
PRESS OR IMPLIED, INCLUDING BUT NOTLIMITED TO ANY
IMPLIED WARRANTYOR MERCHANTABILITY,OR FITNESS FOR ANY
PARTICULARPURPOSE OR USE. HART SHALL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT,INCIDENTAL, OR CONSEQUENTIAL DAM-
AGES OR LOSS WHETHER IN CONTRACT,TORT, OR OTHERWISE.
9011 Dual-Well Calibrator
User’s Guide
10