More NetTool Setup Options
Other setup options include:
Unwanted Protocols
IP Setup
Ping List Editor
Language
About NetTool
afq59s.bmp
⇒Select Unwanted Protocols to specify protocols that NetTool will warn you are present on the network. This helps in situations like a network- wide migration away from certain protocols. If NetTool sees them, it reports them in the Problem Log.
⇒Choose IP Setup to configure your NetTool to ping (check the IP Setup section for details).
⇒Access the Ping List Editor to view, edit, or add to lists of preset IP addresses that you have previously downloaded using NetTool Toolkit.
The editor enables you to add to an existing list or edit an existing IP address within a list.
Select one of the lists by highlighting the list name then pressing Select. Select Add New Device to add an IP address to that list. To edit an existing address, select it then change any of the octets within the address.
⇒Choose Language. Select a language from the available choices.
⇒View software and hardware details. Select About NetTool to view the serial number, MAC address, and revision information. Be sure to record the serial number and MAC address of your NetTool for future reference.
20
