5
Cable Testing You can check cable length, detect split pairs, or use
the wiremap adapter (supplied PN 1563930) to verify
pin-to-pin continuity from the near to the far end of a
cable.
Cable Test⇒ Plug the cable to test
into the jack on either
side of the NetTool.
Power up NetTool.
AutoTest flashes.
Press Select.
⇒ Highlight the Spool icon
and press Select to
see cable status.
NetTool detects cable
length, opens, shorts,
and split pairs.
⇒ This applies for patch
cables as well except
you would plug both
ends in to the NetTool
and then press Select.
afq31s.bmp
afq32s.bmp