Fluke PN 2063508 user manual Measuring Voltage

12 Multimeter

MEASURING VOLTAGE

MEASURING VOLTAGE

1.Insert the test leads in the jacks.

2.To select a voltage function, put the slide-switch in the middle position. See Figure 3.

To toggle between dc and ac, press [g].

3.Touch the probes to the test points, and read the display. The meter beeps an Overload Alert™ when OL (overload) is displayed.

In manual range, you can toggle the meter between a high or low input impedance mode by moving the slide-switch between the voltage and continuity/ohms positions. (See “i AND HOW TO USE IT”.) In the continuity/ohms position, the input impedance of the meter is 2 kΩ, and LoZ is displayed to indicate that the meter is in the low input impedance mode. In the volts position, the input impedance is 5 MΩ in ac and 10 MΩ in dc.

7