Fluke PN 2063508 user manual Capturing Continuity Intermittents with Continuity Capture

12 Multimeter

USING MIN MAX FUNCTIONS

Capturing Continuity Intermittents with Continuity Capture

When testing continuity, the meter can capture intermittents as short as 250 µs, and display them as open-to-short and short-to-open transitions.

1.Put the slide-switch in the continuity/ohms position.

2.Connect the leads to the circuit.

3.Press [j]. The display shows the initial condition (either an open or short) as shown in Figure 9, and j is displayed.

If the meter detects a transition, it beeps and the display captures the transition (see Figure 9). Subsequent transitions cause the meter to beep, but the display does not change.

4.Press [j] to reset the display to the present condition and resume capture mode.

5.To exit, press [j] for 2 seconds or change measurement function.

21