Hitachi DV 14DV Assembly And Operation, Applications, Removal And Installation Method Of Battery

English

ASSEMBLY AND OPERATION

APPLICATIONS

◯Use as a hammer drill

Drilling of soft bricks and concrete blocks.

◯Use as a drill

Drilling of soft steel, wood, plastic and aluminum materials.

◯Use as a screwdriver

Tightening and loosening of machine screws, wood screws and tapping screws.

REMOVAL AND INSTALLATION METHOD OF BATTERY

◯How to install the battery.

		Align the battery with the groove in tool
	Switch Trigger	handle and slip it into place.
		Always insert it all the way until it locks in
	Handle
		place with a little click, If not, it may acciden-
Insert	Latch	tally fall out of the tool, causing injury to
		you or someone around you. (Fig. 3)
	Battery
		◯ How to remove the battery.
Pull out
	Push	Withdraw battery from the tool handle while
		pressing the latches on the sides of the
	Fig. 3	battery. (Fig. 3)

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.

◯The power source voltage is stated on the nameplate.

◯The cord is not damaged.

WARNING: Do not charge at voltage higher than indicated on the nameplate.

If charged at voltage higher than indicated on the nameplate, the charger will burn up.

Battery

Pilot Lamp

1.Insert the plug of battery charger into the receptacle.

When the plug of battery charger has been inserted into the receptacle, pilot lamp will blink in red. (At 1-second intervals)

Fig. 4

13