Multimeter with Temperature

PRead First: Safety Information

To ensure that the meter is used safely, follow these instructions:

∙Do not use the meter if the meter or test leads appear damaged, or if you suspect that the meter is not operating properly.

∙Disconnect the live test lead before disconnecting the common test lead.

∙When using the probes, keep your fingers behind the finger guards on the probes.

∙Do not use the V∙Check mode to measure voltages in circuits that

could be damaged by this mode’s low input impedance (≅2 kΩ).

∙Turn off power to the circuit under test before cutting, desoldering, or breaking the circuit. Small amounts of current can be dangerous.

∙Do not apply more than 600V rms between a meter terminal and earth ground.

∙Use caution when working with voltages above 60V dc or 30V ac rms. Such voltages pose a shock hazard.

PN 643657 June 1997 Rev.2, 3/98