MIN MAX with Elapsed Time μF | Fluke PN 643657 manual

MIN MAX with Elapsed Time μF

Records the hours and minutes between when MIN MAX was entered and the last high and low was recorded. OL is displayed for times longer than 99:59.

To enable the MIN MAX timer, hold down Mwhile turning the rotary switch from OFF to either measurement mode.

Enter MIN MAX. View Maximum Reading					Maximum Reading
Present Reading					Elapsed Time

		2 sec
Minimum Reading	Minimum Reading	Exit MIN MAX
Elapsed Time
		ip11i.eps

Image 10

Fluke PN 643657 instruction sheet MIN MAX with Elapsed Time μF

Contents

Multimeter with Temperature Read First Safety Information Automatic Range Selection SymbolsBattery Saver Manual Range Selection AC and DC Voltage Resistance and Continuity eR Disable and re-enable VCheck ∙Check Temperature Capacitance E If the capacitor requires more Microamps μA Diode Test G Typical voltage MIN MAX μF Records the lowest and highest measurements MIN MAX with Elapsed Time μF Disabling the Beeper Continuity Capture Maintenance Replacement Parts Specifications Function Range Resolution MIN MAX Recording Accuracy and Response Time MIN MAX Recording with Elapsed Time Limited Warranty & Limitation of Liability