Disabling the Beeper
To disable the beeper for all modes, hold down rfor 2 seconds while turning the meter on.
Continuity Capture™
To set up the meter to capture intermittent shorts and opens, turn the
switch to GR, connect the leads to the circuit; then press M.
ip12i.eps
Captures transitions longer than 250 μs (1/4000th of a second).
Transitions after the first transition cause the meter to beep, but the display does not change.
To reset the display to the current condition, press M.
To exit, press Mfor 2 seconds, or change the measurement mode.
