6

Cutting Head cont.

To replace nylon line.

For your convenience it is recommended you buy spool and line complete. Nylon line only is also available. Both are available from Electrolux Outdoor Products stockists.

•If you have spool and line complete, follow steps 5 to 11.

•If you have nylon line only, follow the full procedure below.

•IMPORTANT

Always wind the line onto the upper section of the spool first.

•Remember! Your Flymo Trimmer is designed to use only nylon line with a maximum diameter of 1.5mm. Use only genuine Flymo nylon line.

1.Take approximately 5 metres of line. Insert 15mm of line into one of the holes in the upper section of the spool (S) and wind line in the direction of the arrows on the top of the spool.

2.Leave approximately 100mm of line unwound and

place into cleat as illustrated in figure

T.

3.Repeat on lower section of spool.

4.Care should be taken to ensure that the line is neat- ly coiled on the spool. Failure to do so will impair the efficiency of the automatic line feed.

5.Remove the cap.

6.Remove the old spool.

7.Place spool into spoolholder.

8.Release one line from cleat.

9. Secure line into slot

(Figure R).

10. Repeat for second line.

 

•Ensure spool is fully located by gently rotating it dur-

ing fitment, whilst keeping the spoolholder steady.

11. Refit the cap.

S

upper section

lower section

T

SECURING LINE INTO CLEAT

 

Maintenance

•WARNING

Disconnect from the mains electricity supply, before attempting any maintenance or adjustment.

Cutting head continues to rotate after the trimmer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard.

Caring for your Twist n Edge

After you have finished using your Flymo Twist n Edge follow the procedure below:

1.Disconnect from the mains electricity supply.

2.Never clean your trimmer with water, cleaning fluids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth.

3.Using a soft brush, clean around the inside of the

safety guard, the

cutting head

(Fig U) and the motor

housing air vents.

(Fig V)

 

4.Inspect the trimmer carefully, especially the parts of the cutting head.

5.If your trimmer is damaged in any way contact your local

Electrolux Outdoor Products approved service centre.

•Never use a damaged trimmer.

6.Wind cable carefully to avoid kinking.

7.Store in a cool, dry place and out of reach of chil- dren.

U

V

Environmental Information

Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.

•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.

•Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

•If necessary, contact your local authority for disposal information.

Page 6 Page 8
Page 7
Image 7
Flymo Twist n Edge Trimmer Maintenance, Environmental Information, To replace nylon line, Never use a damaged trimmer
Page 6 Page 8

Twist n Edge Trimmer specifications

The Flymo Twist n Edge Trimmer is an innovative garden tool designed to make lawn maintenance and border edging easier than ever. It combines functionality, performance, and ergonomic design to cater to both homeowners and gardening enthusiasts. With its unique features and powerful technology, the Twist n Edge Trimmer stands out in the crowded market of garden tools.

One of the main features of the Twist n Edge Trimmer is its dual-purpose function. It effortlessly transitions between trimming and edging, allowing users to achieve clean lines and a well-manicured lawn without the need for multiple tools. This versatility is particularly beneficial for garden maintenance, as it enables users to tackle various tasks efficiently.

The trimmer is equipped with a powerful 500W motor that delivers ample power for cutting through grass and weeds. The lightweight design, weighing only around 2.5 kg, ensures that users can maneuver the tool easily without straining their backs or arms. Additionally, the adjustable telescopic handle allows for customization, accommodating different user heights and providing added comfort during extended use.

Another remarkable characteristic of the Flymo Twist n Edge Trimmer is its innovative Twist and Edge technology. This feature enables users to pivot the trimmer head, allowing for precise edging along paths, patios, and flower beds. This aspect enhances control and accuracy, making it easier to maintain tidy borders and preventing overgrowth onto driveways or walkways.

Moreover, the tool is designed with ease of use in mind. The automatic line feed system ensures that the trimming line is fed continually, eliminating the hassle of manual line adjustments. With a cutting diameter of 25 cm, the Twist n Edge Trimmer offers an efficient cutting range, making quick work of grassy areas.

The Flymo Twist n Edge Trimmer also features a durable and robust construction. Its high-quality materials ensure long-lasting performance, making it a reliable choice for regular garden maintenance. Additionally, the eco-friendly design emphasizes energy efficiency, making it not only a practical tool but also a sustainable option for gardening enthusiasts.

In summary, the Flymo Twist n Edge Trimmer is an exceptional garden tool that combines power, versatility, and comfort. With features such as its dual-purpose function, powerful motor, and innovative twist technology, it simplifies lawn care tasks while ensuring professional-looking results. Whether you are a seasoned gardener or just starting out, the Flymo Twist n Edge Trimmer is an invaluable addition to your garden toolkit.
Top Page Image Contents