Tiger Products Co., Ltd TWR-120 Maintenance, Gearbox oil should meet the following specifications

MAINTENANCE

Procedure for refilling the splitter gearbox:

1.Park unit on a level surface

2.Remove drain plug and drain out oil

3.Reinstall drain plug

4.Remove vent plug and level plug

5.Fill gearbox until oil runs out the level plug hole

6.Reinstall vent plug and level plug

7.Dispose of old oil in accordance with the local regulations

Procedure for refilling right angle gearboxes:

1.Park unit on a level surface and lower the wings

2.Remove top cap and use oil/grease pump to suck out oil

3.Replace top cap

4.A dipstick is provided on the vent plug. Fill gearbox until oil level reaches the fill line on dipstick. Do not screw in dipstick when checking oil level

5.Reinstall vent plug/ dipstick

Dispose of old oil in accordance with the local regulations

Gearbox oil should meet the following specifications:

-API Service Classifications GL-5

-Military Specification MIL-L-2105C

Consult the following chart for the oil viscosity recommendations:

NOTE: Use SAE 80-90Gear Oil

TWR-180/TWR-120 12/04	Maintenance Section 5-9
© 2004 Alamo Group Inc.

MAINTENANCE