ASSEMBLY

ASSEMBLY

Transport Light Kit

CAUTION! Use FLASHING WARNING LIGHTS when traveling on public roads day or night, unless prohibited by law.

If the rotary cutter obscures the tractor warning or tail lights, the rotary cutter MUST be equipped with a transport light kit.

Check local highway regulations concerning moving machinery on highways.

Installation of Lights

Secure the cutter into transport position. Mount the brackets to the center beam as shown in the illustration, using the supplied 3/8" U-bolts. The two 4" x 4-3/4" U-bolts are needed for the TWR-180/TWR-120 kit, and the two 5" x 6" U-bolts can be discarded.

Align the outside edge of the brackets with the end caps on either side of the beam. Tighten into place. Using the 5/16" bolts, mount the lights to the brackets with the red and amber lenses facing to the rear, and the amber in the outer-most left and right positions. When the cutter is in transport position, the light assemblies should be sitting vertical on the center beam.

Wiring Harness

The seven pin plug and wiring harness is pre-wired with the 7' leg to attach to the left hand light assembly and the 4' leg to attach to the right hand light assembly. Left and right hand is determined by standing at the rear of the cutter looking in the direction of normal forward travel. The wiring harness plugs are colored coded for connection to the appropriately colored lamp.

Using the cable ties, route the harness along the hydraulic hoses to the front of the cutter Allow enough slack in the harness for the up and down movement wings. There should be approximately 5' to 6' of harness extending past the hitch point for connection to the tractor.

Circuit Testing

The seven pin plug is wired as follows:

The lights should operate in unison with your tractor lights.

Terminal 1 Ground

Terminal 3 LH Turn & Flash

Terminal 5 RH Turn & Flash

Terminal 6 Tail Lamps

TWR-180 / TWR-120 12/04

Assembly Section 3-6

© 2004 Alamo Group Inc.

 

Page 31 Page 33
Page 32
Image 32
Tiger Products Co., Ltd TWR-180, TWR-120 manual Transport Light Kit
Page 31 Page 33

TWR-120, TWR-180 specifications

Tiger Products Co., Ltd has established itself as a leader in the manufacturing of advanced welding and cutting equipment. Among its innovative offerings are the TWR-180 and TWR-120 models, which have quickly gained attention for their superior technology, robust features, and reliable performance.

The TWR-180 is designed for high-capacity operations, featuring an impressive welding output that makes it suitable for a variety of applications in industries such as automotive, construction, and heavy machinery. One of the standout features of the TWR-180 is its dual pulse technology, which allows for precise control over welding depth and heat input. This technology not only enhances the quality of welds but also minimizes material distortion, making it ideal for intricate designs and complex assemblies.

In addition to its advanced welding capabilities, the TWR-180 includes digital control systems that provide operators with real-time feedback on welding parameters. This user-friendly interface is complemented by programmable memory settings that allow users to save specific welding configurations, thereby enhancing productivity. The TWR-180 is also equipped with a high-efficiency cooling system that prevents overheating during extended use, ensuring that the equipment remains operational without interruptions.

On the other hand, the TWR-120 is specifically tailored for smaller-scale projects while maintaining professional-grade performance. The compact design of the TWR-120 makes it easy to transport and set up, which is vital for on-site applications. It features a simplified control panel that allows for quick adjustments, making it accessible for operators with varying levels of expertise.

Despite its smaller size, the TWR-120 does not compromise on power; it is equipped with innovative inverter technology that maximizes energy efficiency while providing stable output across various welding tasks. This model is particularly appealing to small businesses and workshops looking for a reliable yet versatile welding solution.

Both the TWR-180 and TWR-120 utilize advanced arc stabilization technologies that enhance the quality of the weld, reduce spatter, and improve overall efficiency. These characteristics, combined with exceptional durability and low maintenance requirements, highlight Tiger Products Co., Ltd's commitment to delivering top-tier equipment that meets the needs of diverse industries.

In summary, the TWR-180 and TWR-120 reflect Tiger Products Co., Ltd’s dedication to innovation, quality, and user-centric design. Whether for high-capacity operations or smaller-scale tasks, these models provide exceptional performance and reliability that set them apart in the competitive welding equipment market.
Top Page Image Contents