OPERATION
OPERATION
4. STARTING THE TRACTOR
The operator must have a complete understanding of the placement, function, and operational use of all tractor controls before starting the tractor. Review the tractor operator’s manual and consult an authorized dealer for tractor operation instructions if needed.
Essential Tractor Controls:
¾Locate the light control lever
¾Locate the engine shut off control
¾Locate the brake pedals and the clutch
¾Locate the PTO control
¾Locate the 3 point hitch control lever
¾Locate the hydraulic remote control levers
Before starting the tractor ensure the following:
¾Conduct all
¾Make sure all guards, shields, and other safety devices are securely in place.
¾The parking brake is on.
¾The PTO control lever is disengaged.
¾The
¾The hydraulic remote control levers are in the neutral position.
¾The tractor transmission levers are in park or neutral.
Refer to the tractor owner’s manual for tractor starting procedures. Only start the tractor while seated and belted in the tractor operator’s seat. Never bypass the ignition switch by short circuiting the starter solenoid.
After the tractor engine is running, avoid accidental contact with the tractor transmission to prevent sudden and unexpected tractor movement.
DANGER! Never run the Tractor engine in a closed building or without adequate ventilation. The exhaust fumes can be hazardous to your health.
DANGER! Start the Tractor only when properly seated in the Tractor seat. Starting a Tractor in gear can result in injury or death. Read the Tractor operator’s manual for proper starting instructions.
Operation Section |
© 2004 Alamo Group Inc.